To Record Outgoing Message (Ogm) - Sanyo CLT-D14 Instruction Manual

DIGITAL ANSWERING MACHINE

To record outgoing message (OGM)

There are two different Outgoing messages for the two answering
modes of operation, the 2-4 rings of Answering and Recording mode
and the Announce Only mode. You must record OGM before the
machine will work.
To record the Answering and Recording outgoing message (OGM1)
1. Slide the " Ringer " Switch at the bottom of the base unit to " 2 " or
" 4 " position.
2. Press and hold the
3. Speak the message for recording. The microphone is located at
the front of the base unit.
4. Press the
the has not been pressed, the recording will be automatically
terminated when the recording time exceeds 2 minutes.
5. The recorded message will be automatically playback for
confirmation.
6. You can always record a new message to replace the recorded
message by repeating step 2 to 4 above.
at the base until a beep tone is heard.
and beep sound will be heard for stop recording. If
24