Using The Base Station Speed-Dial Memory - Sanyo CLT-2430 Instruction Manual

CLT2430 5th 8/9 8/10/00
DIRECTORY/

Using the base station speed-dial memory

Storing numbers in the speed-dial memory
You can store only numbers in the base memory.
Note:
If you store a phone number in one of speed-dial locations and
attempt to store different number in the same location later, the
new number will replace the previous one.
Note:
You cannot use the speed-dial memory feature from the handset
and the handset directory from the base station.
E26
4:29 PM Page 30
SPEED-DIAL
1
Press MEMORY. The CHARGE/IN USE
indicator blinks.
2
Dial the number you want to store.
(up to 16 digits)
3
Press MEMORY and enter the memory location
number (0–9) on the keypad.
A confirmation tone sounds.