Table of Contents
Advertisement
DIGITAL ANSWERING MACHINE
Call Screening
When there is an incoming call, you may let the answering machine
to answer the call, the announcement and the recording of incoming
message will be broadcast on the base speaker. You may monitor
the broadcast to decide if you want to intercept the call at any time by
simply pressing the
on the handset (or pickup other parallel
connected telephone's handset) and take over the call and speak to
the caller.
The Answering machine will automatically terminate the operation
and hands over the telephone call to your activated handset.
To record memo message
You may use the MEMO feature to record a message which you may
leave if for your family member to listen. To record a memo:
1. Press and hold
until you hear a beep tone.
2. Speaking the message to the microphone at the base.
3. At the end of the recording, press the
to terminate the
recording.
Note: If memory is full, no new message can be recorded and error
tone will be heard when pressing
.
Message playback
The Message LED will flash slowly in green when there is(are) new
message(s) (including incoming/memo messages). Press
to
play all new messages.
After all new messages have been playback, the Message LED will
be lit in green to indicate the switching on of the Answering machine.
Press
again will replay all recorded messages from the earliest
recorded message.
27
Advertisement
Table of Contents
