Drives - HP ProDesk 400 G3 Small Form Factor Maintenance And Service Manual

Drives

Hard drive
2 TB, 7200 rpm, 3.5 inch
1 TB, 7200 rpm, 3.5 inch
1 TB hard drive, hybrid SSD
500 GB, 7200 rpm, 3.5 inch
500 GB, 7200 rpm, 2.5 inch, self-encrypting (SED)
500 GB, 5400 rpm, 2.5 inch, FIPS
500 GB hard drive, hybrid SSD
512-GB Solid-state Drive (SSD), 3D, NAND
256-GB Solid-state Drive (SSD), 3D, NAND
256-GB Solid-state Drive (SSD), self-encrypting (SED)
256-GB Solid-state Drive (SSD)
180-GB Solid-state Drive (SSD)
180-GB Solid-state Drive (SSD), MLC, OPAL2.0
128-GB Solid-state Drive (SSD)
128-GB Solid-state Drive (SSD), 3D, NAND
128-GB Solid-state Drive (SSD), self-encrypting (SED)
120-GB Solid-state Drive (SSD)
120-GB Solid-state Drive (SSD), MLC, OPAL2.0
Optical drive
Blu-ray BD-RW SuperMulti XL Drive
DVD±RW drive
DVD-ROM drive
When installing drives, follow these guidelines:
● The primary Serial ATA (SATA) hard drive must be connected to the dark blue primary SATA connector on
the system board labeled SATA0.
● Connect an optical drive to the light blue SATA connector on the system board labeled SATA1.
30 Chapter 4 Removal and replacement procedures: Small Form Factor