Expansion Card - HP ProDesk 400 G3 Small Form Factor Maintenance And Service Manual

Expansion card

Description
Printer port, PCI card
GeForce GT 730 graphics card, 2 GB, DDR3, PCIe x8
Nvidia NVS 310 graphics card, 512 MB, DDR3, PCIe x16
Intel 802.11 a/b/g/n (2x2) + Bluetooth 4.0 Wireless NIC
Intel Dual Band Wireless 7265NV 802.11 a/b/g/n (2x2) Wireless NIC
Intel Dual Band Wireless 7265AN 802.11 a/b/g/n (2x2) Wireless NIC
Intel Dual Band Wireless-AC 3165
WLAN module adapter, PCIe card
Intel PRO/1000 single port GbE NIC, includes bracket
The computer has one PCI Express x1 expansion socket and one PCI Express x16 expansion socket.
NOTE: The PCI Express sockets support only low profile cards.
You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16 socket.
For dual graphics card configurations, the first (primary) card must be installed in the PCI Express x16 socket.
To remove, replace, or add an expansion card:
1. Prepare the computer for disassembly
2. Remove the access panel
3. Locate the correct vacant expansion socket on the system board and the corresponding expansion slot
on the back of the computer chassis.
4. Rotate the slot cover release latch to the open position.
20 Chapter 4 Removal and replacement procedures: Small Form Factor
(Preparation for disassembly on page
(Access panel on page 18).
17).