Table of Contents
Advertisement
WIRE RACKS
– Assemble the wire racks to the oven
walls using the 2 screws (Fig. 4.1).
– Slide into the guides, the shelf and the
tray (fig. 4.2).
The shelf must be fitted so that the
safety catch, which stops it sliding
out, faces the inside of the oven.
– To dismantle, operate in reverse order.
Fig. 4.2
28
REPLACING THE OVEN LIGHT
Before any maintenance is started
involving electrical parts of the appli-
ance, it must be disconnected from the
power supply.
– Let the oven cavity and the heating
– Switch off the electrical supply;
– Unscrew the protective cover (fig. 4.3);
– Unscrew and replace the bulb with a
– Refit the protective cover
NOTE: Oven bulb replacement is not
covered by your guarantee
Fig. 4.1
elements cool down;
new one suitable for high tempera-
tures (300°C) having the following
specifications: 230-240V 50 Hz, 15W,
E14
Fig. 4.3
2
1
Hide quick links:
Advertisement
Table of Contents
