Kenwood CKB 250E Instructions For Use Manual page 16

Multi-function electronic oven
Table of Contents

Advertisement

2
ND
METHOD: Programming the time when cooking will be completed.
• Set the oven (function and temperature) as indicated in the "USING THE OVEN - COOKING
FUNCTIONS" chapter.
• Set the time when cooking will be completed ("hh:mm" - hours and minutes) by pressing
button "
" (" : " symbol flashes on the programmer display) and then button "
move forward or "
ten minutes less than the time required because the stored heat will complete the cooking.
• "A" letter and "
immediately and it will switch off automatically at the end of the cooking time (an inter-
mittent acoustic signal sounds, the "A" letter and "
display and the oven lamp is lit - press any pushbutton of the programmer [not ON/OFF]
to stop the intermittent acoustic signal).
• During cooking press button "
lights only oven lamp) to display the time when cooking will be completed.
• During cooking press button "
lights only oven lamp) to display the remaining duration of the cooking (countdown).
• The cooking program can be cancelled at any time as indicated in the "CANCELLING A
SET PROGRAMME" chapter.
CAUTION: after a black-out three zeroes
"0:00" appear on the display.
16
The semi-automatic cooking is cancelled.
" to move back if you have gone beyond the required time. Set it to
" symbol appear on the programmer display; the oven starts to operate
" (press two times if the oven lamp is not lit - first press
" (press two times if the oven lamp is not lit - first press
" symbol flash on the programmer
Example
3
1
10
9
8
1 - Time when the oven is programme (10:00)
2 - Time when cooking will be completed (12:00)
3 - Duration of the cooking (2 hours).
" to
2
12
1
11
2
3
4
7
5
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents