Kenwood CKB 250E Instructions For Use Manual page 20

ABNORMAL SITUATIONS - ERROR CODES
In case of abnormal situations the oven is automatically switched off: only the cooling fan
motor operates and on the programmer display, an error message code appears.
The oven is stalled.
If this condition disappears the oven returns in the stand-by (
central programmer display is activated and the time is displayed.
If this condition does not disappear try to disconnect the oven from the mains and then
reconnect.
If the abnormal situation persists, disconnect the oven
from the mains and contact the After-Sales Service.
IMPORTANT - "
This indicates that the oven cavity is overheated. The oven is stalled and has to be
activated as below:
• Open the oven door and let the cavity to cool.
• Press the two buttons "
• Three zeroes "0:00" flash on the display; proceed as per first connection to the mains
by setting the time of the day and then activating the oven programmer.
If this abnormal situation persists disconnect the oven from the mains and contact the
After-Sales Service
SOME ERROR
CODES ON
TEMPERATURE
DISPLAY
20
----
" MESSAGE ON BOTH PROGRAMMER AND TEMPERATURE DISPLAYS
" simultaneously.
OFF
) condition where the
SOME ERROR
CODES ON
TEMPERATURE
DISPLAY