Pairing The Oontz Angle 3 To Your Bluetooth Enabled: Laptop Or Apple Computer; Wireless Hands-Free Personal Speakerphone - Oontz Angle 3 Manual

connected to your device. You can now play wirelessly from your device. You can adjust the speaker volume
from your device and the VOL + Button (6) and the VOL – Button (4) on the speaker.
Important: to reach high volume make sure the volume on your device is set high and the OontZ Angle 3
volume is set high.
Note 1. The OontZ Angle 3 can only be connected to one device at a time. You will need to disconnect the first
device from the OontZ Angle 3 before trying to pair to another device: Press and hold the Bluetooth button for 3
to 5 seconds for the speaker to enter pairing mode, it will disconnect from the current device when entering
pairing mode. The blue light will flash indicating the device is disconnected and the OontZ Angle 3 is in pairing
mode. You can then pair and connect to the next device.
Note 2. The OontZ Angle 3 will automatically try to pair to the last connected device each time it is turned on and
that device is or comes within range. If the OontZ Angle 3 successfully connects to the last device it will prevent
any other device from pairing to it, until that current device is disconnected.
Note 3: You can play wirelessly to your speaker up to 33 unobstructed feet away from your device
For further assistance on specific devices:
iPhone 6 Plus- http://store.theoontz.com/info/iPhone_6_Plus
iPhone 6- http://store.theoontz.com/info/iPhone_6
iPhone 5 and 4- http://store.theoontz.com/info/iPhone_5

6) Pairing the OontZ Angle 3 to your Bluetooth enabled: Laptop or Apple computer

For instructions on pairing the OontZ Angle 3 with a laptop, please select one of the links below according to
your operating system:
MacBook Pro- http://store.theoontz.com/info/Help_Getting_Started#macbookpro
Window 8- http://store.theoontz.com/info/Help_Getting_Started#windows8
Windows 7- http://store.theoontz.com/info/Help_Getting_Started#windows7

7) Wireless Hands-Free Personal Speakerphone

When connected by Bluetooth to a smartphone that supports Hands-Free Profile (HFP) , the OontZ Angle 3
will have Wireless Hands-Free Speakerphone enabled.
To answer an incoming call, press and release the Bluetooth Button (3). To end a call, press and release the
button. To reject a call, press and hold down the button for about three seconds.