Advertisement

Welcome to the OontZ Angle 3 Guide
Thank you very much for being an OontZ Angle 3 owner. Enjoy listening to your music, videos and games on
your speaker, playing wirelessly from your Bluetooth devices. This guide was designed to help you quickly
get started and answer any functional questions you have regarding your speaker. Please take a few minutes
to read through this guide and try out the features on your OontZ Angle 3. You can always check out our
website: TheOontZ.com for the latest in Getting Started Help, information, manual updates, and to see the
whole family of OontZ Ultra Portable Wireless Bluetooth Speakers.
Table of Contents: Version 2.0
1.
2.
3.
4.
5.
Pairing the OontZ Angle 3 to your Bluetooth
device
6.
Pairing the OontZ Angle 3 to your Bluetooth
enabled: Laptop or Apple computer
7.
8.
9.
0.
Safety and precautions

Advertisement

Table of Contents
loading

Summary of Contents for Oontz Angle 3

  • Page 1 Please take a few minutes to read through this guide and try out the features on your OontZ Angle 3. You can always check out our website: TheOontZ.com for the latest in Getting Started Help, information, manual updates, and to see the whole family of OontZ Ultra Portable Wireless Bluetooth Speakers.
  • Page 2 1) Overview The OontZ Angle 3 allows you to listen to music, videos and games wirelessly from almost all smartphones, tablets and other Bluetooth devices. This speaker delivers surprisingly loud sound and deep rich bass in high quality, distortion-free stereo sound. The OontZ Angle 3 is also IPX5* water resistant, designed to be splashproof and dustproof.
  • Page 3 9. Black Rubber Flap - Both the AUX IN JACK (10) and Micro USB Charging Port (11) are located under the rubber flap on the back side of the OontZ Angle 3. Open the flap by gently lifting the bottom edge. The top of the flap is attached to the speaker.
  • Page 4 Note 3. It is recommended that you remove the charging cable after the OontZ Angle 3 is fully charged. ** When fully charged, the OontZ Angle 3 can play audio for up to 7 hours. This play time may vary for a number of reasons including;...
  • Page 5 Note 1. The OontZ Angle 3 can only be connected to one device at a time. You will need to disconnect the first device from the OontZ Angle 3 before trying to pair to another device: Press and hold the Bluetooth button for 3 to 5 seconds for the speaker to enter pairing mode, it will disconnect from the current device when entering pairing mode.
  • Page 6 You can use your smartphone to switch between using Hands-Free Speakerphone and the device. Note 1: An incoming call will be heard on the OontZ Angle 3 and your voice will be picked up by the inbuilt microphone. Please keep the speaker close in front of you so you may be heard clearly by the listener.
  • Page 7 You will need to disconnect the other device from the OontZ Angle. Make sure your device supports Bluetooth audio. Make sure the OontZ Angle 3 is in pairing mode, the blue light should be flashing. OontZ Angle 3 appears on my device, Make sure the OontZ Angle 3 is not currently connected to any other device.
  • Page 8 Some devices need to have their WIFI turned off to improve audio quality over Bluetooth. It may be that you need to re-pair the OontZ Angle 3 with your device. Remove it from your paired devices list, restart the device/computer, and then follow the steps to re-pair the speaker.
  • Page 9 10) Safety & Precautions FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 10 4. Follow all instructions – All operating and use instructions should be followed. 5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like. 6.

Table of Contents