Oontz Angle 3 Manual page 8

No Audio from AUX source
Poor sound quality from AUX source
Music does not resume after hanging up a call
Windows laptop is asking for drivers
OontZ Angle 3 switches off
If you're MacBook, iPad, PC or tablet has an option to
select stereo or Mono select Stereo.
Try another track or music app.
Turn your OontZ Angle 3 off and back on.
Some devices need to have their WIFI turned off to
improve audio quality over Bluetooth.
It may be that you need to re-pair the OontZ Angle 3 with
your device. Remove it from your paired devices list,
restart the device/computer, and then follow the steps to
re-pair the speaker.
Make sure the 3.5mm audio cable is fully inserted into
the OontZ Angle 3 and Device. Some devices have cases
that prevent a proper fit and need to be removed to
connect. Make sure your device is on and playing and
music
Increase the volume level on the OontZ Angle 3 and the
device.
Make sure the 3.5mm audio cable is fully inserted into
the OontZ Angle 3 and device.
Reduce the volume level on the AUX source.
Remove the charging cable while playing.
Ensure you have paired the OontZ Angle 3 correctly with
your Bluetooth device
Resume music play on the Bluetooth connected device
The OontZ Angle 3 does not require drivers, and there are
none for it.
If a message like this or similar is displayed, you need to
download the drivers from your vendors support site. After doing
so, your system should be restarted then the appropriate steps in
the user guide to pair and connect to your computer.
The OontZ Angle 3 has an automatic shut off feature
after 15 minutes of no audio being played through it.
It will not switch off automatically at any point when
plugged in and charging.