OontZ Angle solo - Portable Wireless Bluetooth Speaker Manual

OontZ Angle solo - Portable Wireless Bluetooth Speaker Manual

Also See for Angle solo:

Advertisement

OontZ Angle solo - Portable Wireless Bluetooth Speaker Manual

In the Package

Note: The cable and lanyard are packed below the cardboard insert in the box. Slide out the insert to locate them.

Buttons

Buttons

Volume Down
Press to decrease volume

Track Back
Press and Hold Down to go to the beginning of the track
Press and Hold Down twice to go to previous track

Volume Up
Press to increase volume

Track Forward
Press and Hold Down to go to the next track

Note: Some apps may not support track back, track forward, or play/pause


The volume control on your device and the speaker work independently of each other. To play the speaker at the loudest volume, set the volume on your device to maximum and raise the volume on the speaker to maximum.

Lights

Lights

Blue Light lit when speaker is on:

  • Flashing Blue speaker is in pairing mode
  • Solid Blue speaker is connected

Red Light lit when charging:

  • Slowly flashing Red battery is charging
  • Solid Red battery is fully charged

Connectors

Connectors

Rubber Flap

  • covers connectors
  • pull gently from the top to access connectors, it is a snug fit to provide water resistance

Note: The rubber flap needs to be closed to keep the speaker water resistant

Attaching the Lanyard

  • Slide the smaller lanyard loop through one of the lanyard attachment holes at the top of the speaker
  • Slide the larger lanyard loop through the smaller lanyard loop that has passed though the other attachment hole
  • Pull the larger lanyard loop completely through the smaller lanyard loop to fasten the lanyard to the speaker
  • The lanyard is not for use by children under 6 years of age. Small parts can present a choking hazard.

Battery Features

  • The rechargeable battery comes with a partial charge and the speaker is ready to play.
  • For maximum playtime, fully charge the battery.
  • You can play while charging.

Low Charge Remaining

  • When the battery charge has less than 15% remaining the Red Light will begin flashing rapidly.
  • The volume will decrease to preserve the remaining battery charge.

Music Play Time

Up to 12 hours on a full charge, at 2/3 volume. Louder volumes will reduce the battery play time.

Power Saving Feature

  • When playing from battery power the OontZ Angle solo will turn off after 15 minutes of not playing audio to conserve the battery charge. *
  • When plugged into a charging source the OontZ Angle solo will remain on until you turn the power off.
  • You can continue to keep the speaker plugged into a charging source even when it is fully charged, keeping the speaker turned on and available

*Exception: when connected to certain devices, including the Amazon Echo Dot or Amazon Echo, the Power Saving Feature is disabled and the speaker will remain on until you turn the power off.

Charging the Battery

Charging the Battery - Step 1

Red Light lit when charging:

  • Slowly flashing Red
    battery is charging
  • Solid Red
    battery is fully charged
  • Insert the small end of the Micro USB Charging Cable into the Micro USB Charging Connector as shown.
  • Insert the large end of the Micro USB Charging cable into either a USB wall charger for a Smartphone or iPhone, or a USB port on your laptop/computer to charge the battery.

Charging Time:

  • Up to 4 hours to fully charge a low battery.

Charging the Battery - Step 2
Insert the large end of the Micro USB charging cable into either a USB wall charger for a Smartphone or iPhone (a USB wall charger* that is 5V 1.0A up to 5V2.4A maximum) or a USB port on your laptop/computer to charge the OontZ Angle solo rechargeable battery.

* Only use a USB wall charger that is UL Listed

Turning On and Off

Turn ON
Press and Release the Power Button
Turn ON

Blue Light will turn on

  • Flashing Blue
    The speaker is in pairing mode
  • Solid Blue
    Your device has connected with the OontZ Angle solo and is ready to play

Turn OFF

Press and Hold Down the Power Button for 2 Seconds
Blue Light will turn off

Pair & Connect with Your Device

Turn ON your OontZ Angle solo

Flashing Blue Light

  • The OontZ Angle solo is ready to pair and connect.

Solid Blue Light

  • Your device has connected to the OontZ Angle solo and is ready to play.
  • The OontZ Angle solo allows the last device it was connected with to automatically reconnect with the speaker, each time you turn the speaker on and that device is within range.*

The OontZ Angle solo can be connected to one device at a time.

  • To pair and connect to a different device, you need to first disconnect the currently paired device.
  • To disconnect the current device, press and hold down the Bluetooth button for 3 seconds.
  • The Blue Light will begin flashing and the OontZ Angle solo is ready for the next device to pair and connect.

*Exception: certain devices may not automatically reconnect. Amazon Echo devices will not automatically reconnect. You will need to say "Alexa, connect my speaker"

  • Your device needs to be within 80 unobstructed feet of the OontZ Angle solo to pair and connect. If there is an issue when connecting please move your device closer to the speaker, then pair and connect.
  • When the charge is too low indicated by a flashing red light on the speaker, your device will not be able to connect with the speaker.

With Your iPhone, iPad, or iPod

  • Go to Settings > Bluetooth, check Bluetooth is on
  • Select 'OontZ Angle solo xxx' when it appears under DEVICES (xxx: 3 characters which are unique to your speaker)
  • Your device will connect in a few seconds
  • The Blue Light will turn solid blue and there will be a quiet chime
  • You can now play your audio wirelessly to your OontZ Angle solo

With Your Smartphone, Tablet & Mobile Devices

  • Go to Settings > Bluetooth, check Bluetooth is on
  • Scan or Search and select 'OontZ Angle solo xxx' when it appears under AVAILABLE DEVICES (xxx: 3 characters which are unique to your speaker)
  • Your device will connect in a few seconds
  • The Blue Light will turn solid blue and there will be a quiet chime
  • You can now play your audio wirelessly to your OontZ Angle solo

Note: Your Smartphone or Tablet instructions may vary


The volume control on your device and the speaker work independently of each other. To play the speaker at the loudest volume, set the volume on your device to maximum and raise the volume on the speaker to maximum.

With Your Apple Mac or Windows Laptop/Computer

For the pairing and connecting guide for your Apple Mac or Windows laptop/computer, please visit: TheOontZ.com/pairing

With Your Amazon Echo or Amazon Echo Dot

To pair and connect with the Amazon Echo or Amazon Echo Dot the first time use the Alexa app. For other Amazon Alexa devices please refer to their pairing and connecting instructions.

  • Open the Alexa app
  • Go to the 'Home' menu by pressing the 3 horizontal lines in the upper left corner next to 'Home'
  • Press 'Settings'
  • Select your Amazon Echo device under 'Devices' by pressing it
  • Press 'Bluetooth'
  • Select the 'OontZ Angle solo xxx' (xxx: 3 characters unique to your speaker) when it appears in the list of 'Available Speakers'
  • Alexa will announce: "Connected to OontZ Angle solo"

To connect the next time, turn on the OontZ Angle solo and say "Alexa, connect my speaker" or "Alexa, pair"


When the OontZ Angle solo is playing from battery power and connected to the Amazon Echo device, the speaker will remain on and it will not automatically turn off after 15 minutes of not playing audio. This will use up the battery charge.

We recommend to:

  1. Keep the OontZ Angle solo plugged into a USB wall charger and it will remain on and available to play from the Amazon Echo device until you manually turn the speaker power off.

- Or -

  1. Turn off the OontZ Angle solo when you are done listening.
  • Either turn off the speaker by pressing and holding down the Power button for 2 seconds,
  • or say "Alexa, disconnect my speaker" and the OontZ Angle solo will automatically turn off after 15 minutes.
  • When you want to connect and play to the speaker again turn on the OontZ Angle solo and say "Alexa, connect my speaker" or "Alexa, pair".

For assistance with the Alexa app, contact Amazon's Customer Service.

Open the Alexa app and select Help & Feedback > Email Customer Service

To Play with Non-Bluetooth Devices use a 3.5mm Stereo Audio Cable

Turn ON your OontZ Angle solo

  • Plug one end of a 3.5mm stereo audio cable into the AUX IN Jack on the speaker.
  • The Blue Light will turn solid Blue.
  • Plug the other end of the cable into the headphone jack on your device.
  • Make sure both ends of the cable are fully inserted
  • You are now ready to play.


The Bluetooth on the OontZ Angle solo is disabled when the 3.5mm audio cable is connected to the speaker. You need to remove the 3.5mm audio cable from the speaker in order to connect to a Bluetooth device.

  • Note: When the rubber flap is open to allow the 3.5mm audio cable to be connected, the speaker is not water resistant. The rubber flap needs to be closed to keep the speaker water resistant.
  • Note: The volume control on your device and the speaker work independently of each other. To play the speaker at the loudest volume, set the volume on your device to maximum and raise the volume on the speaker to maximum.

3.5mm stereo audio cables are sold separately at TheOontZ.com

IPX5 Water Resistant

The rubber flap needs to be closed to keep the speaker water resistant and dustproof

Safety Precaution: When the OontZ Angle solo speaker is plugged in to a charging source with the Micro USB charging cable, never use the speaker in the shower, bath, or near water, to prevent risk of electric shock.

IPX5 rating - The OontZ Angle solo can resist water spray & splash but cannot be partially or fully submerged or left in a wet environment for an extended period of time, any of which could cause unrepairable damage to the speaker.

Note: The rubber flap needs to be closed to keep the speaker water resistant

Wireless Hands Free Personal Speakerphone

The Wireless Hands Free Personal Speakerphone feature works over Bluetooth with Smartphones and iPhones only; this feature is not supported when connected to other types of devices.

To answer an Incoming Call / To End a Call

  • Press and Release the Bluetooth Button

To Reject an Incoming Call

  • Press and Hold Down the Bluetooth Button for 2 Seconds
  • Please keep the speaker close in front of you so you may be heard clearly by the listener.
  • You can use your Smartphone or iPhone to switch between using Hands Free Speakerphone and your phone.

Reset Function

Reset Function

Step 1: Remove the Micro USB charging cable and 3.5mm Audio cable, if connected

Step 2: Press and hold down the Power button and button together for one second and then release both buttons

Step 3: The speaker has now been reset and you can turn it on

Customer Support

If you have a question about your OontZ Angle solo or experience an issue with the speaker, our Customer Support Team wants to assist you.

For online troubleshooting tips please visit:
TheOontZ.com/troubleshooting and select the OontZ Angle solo

Contact us at:
TheOontZ.com/support
and fill in our customer support form

TheOontZ.com

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download OontZ Angle solo - Portable Wireless Bluetooth Speaker Manual

Advertisement

Need help?

Need help?

Do you have a question about the Angle solo and is the answer not in the manual?

Questions and answers

Table of Contents