Nvr44/44-8P/44-16P/74/74-8P/74-16P Series - Dahua NVR100 series User Manual

Icon Name
HDD HDD status indicator
light
NET Network status indicator
light
POWER Power status indicator light
USB2.0 port

2.1.6 NVR44/44-8P/44-16P/74/74-8P/74-16P Series

The front panel is shown as in Figure 2-7.
Please refer to the following sheet for front panel button information.
Name
Power button
Shift
Up/1
Down/4
Left/2
Right/3
ESC
Enter
Icon Function
Power button, press this button for three seconds to boot up
or shut down NVR.
In textbox, click this button to switch between numeral,
Shift
English(Small/Capitalized),donation and etc.
Activate current control, modify setup, and then move up and
down.
Increase/decrease numeral.
、
Assistant function such as PTZ menu.
In text mode, input number 1/4 (English character G/H/I)
Shift current activated control,
When playback, click these buttons to control playback bar.
⊳
In text mode, input number 2(English character A/B/C)
/3(English character D/E/F)
.
Go to previous menu, or cancel current operation.
ESC
When playback, click it to restore real-time monitor mode.
Confirm current operation
ENTER
Go to default button
Function
The blue light is on when the HDD is malfunction.
The blue light is on when the network connection is
abnormal.
The blue light is on when the power connection is
OK.
Connect to peripheral USB 2.0 storage device,
mouse, burner and etc.
Figure 2-7
37