③
C onnect to the HDD data cable to the main board
and the HDD port respectively. Loosen the power cable
of the chassis and connect another end of the power
cable to the HDD port.
3.3.7 NVR78-RH Series
①
T urn the key into the hole in the front
panel.
u t the HDD to the slot and adjust the
③
handle to secure it.
HDD Handle Installation
④
A fter connect the cable, put the front cover
back to the device and then fix screws of the rear
panel.
②
O pen the front panel.
P ut the front panel back and use the key to fix
④
firmly.
91