Nvr74-8P/74-16P Series - Dahua NVR100 series User Manual

+12V
eSATA
RS-232
VGA

2.2.14 NVR74-8P/74-16P Series

The NVR74-8P series rear panel is shown as below. See Figure 2-38.
The NVR74-16P series rear panel is shown as below. See Figure 2-39.
Please refer to the following sheet for detailed information.
Port Name
Power switch
Power input
port
+12V power output port. It can provide the power
/
to some peripheral devices such as the camera
or the alarm device. Please note the supplying
power shall be below 1A.
Network port
One 10M/100M/1000Mbps self-adaptive Ethernet
port. Connect to the network cable.
eSATA port External SATA port. It can connect to the device
of the SATA port. Please jump the HDD when
there is peripheral connected HDD.
USB2.0 port USB2.0 port. Connect to mouse, USB storage
device, USB burner and etc.
RS-232 debug It is for general COM debug to configure IP
COM. address or transfer transparent COM data.
VGA video output port. Output analog video
VGA video
signal. It can connect to the monitor to view
output port
analog video.
Figure 2-38
Figure 2-39
/ Power on-off button
/ Input AC 100~240V.
Function
67