Nvr44/44-8P/44-16P/74/74-8P/74-16P Series - Dahua NVR4108-P User Manual

Play Next/9
Play/Pause /5 ||
USB port
Network
abnormal
indicator light
HDD
abnormal
indicator light
Record light
IR Receiver

2.1.5 NVR44/44-8P/44-16P/74/74-8P/74-16P Series

The front panel is shown as in Figure 2-5.
Please refer to the following sheet for front panel button information.
Name
Power button
Shift
Up/1
Down/4
In playback mode, playback the next video
In menu setup, go to down ward of the dropdown list.
|
In text mode, input number 9 (English character W/X/Y/Z)
.
In normal playback click this button to pause playback
In pause mode, click this button to resume playback.
In text mode, input number 5(English character J/K/L).
To connect USB storage device, USB mouse.
Network error occurs or there is no network connection, the
Net
light becomes red to alert you.
HDD error occurs or HDD capacity is below specified
HDD
threshold value, the light becomes red to alert you.
System is recording or not. It becomes on when system is
1-16
recording.
It is to receive the signal from the remote control.
IR
Icon Function
Power button, press this button for three seconds to boot up
or shut down NVR.
In textbox, click this button to switch between numeral,
Shift
English(Small/Capitalized),donation and etc.
Activate current control, modify setup, and then move up and
down.
、
Increase/decrease numeral.
Assistant function such as PTZ menu.
In text mode, input number 1/4 (English character G/H/I)
Figure 2-5
31