Nvr41-8P Series; Nvr42/42-P/42-8P/72/72-8P Series - Dahua NVR100 series User Manual

Icon
NET
PWR
HDD
IR

2.1.3 NVR41-8P Series

The front panel is shown as below. See Figure 2-3.
Please refer to the following sheet for detailed information.
SN Name
Network status indicator
1
light
2 Power indicator light
3 HDD status indictor light
4 USB

2.1.4 NVR42/42-P/42-8P/72/72-8P Series

The front panel is shown as below. See Figure 2-4.
Please refer to the following sheet for front panel button information.
Name
Power button
Name Function
Network status The red light becomes on when the network
indicator light connection is abnormal.
Power indicator The red light becomes on when the power
light connection is OK.
HDD status
The red light becomes on when HDD is abnormal.
indictor light
Remote control
It is to receive signal from the remote control.
receiver
Icon Function
Power button, press this button for three seconds to boot up
or shut down NVR.
Figure 2-3
Function
The red light becomes on when the network
connection is abnormal.
The red light becomes on when the power
connection is OK.
The red light becomes on when HDD is abnormal.
USB port
Figure 2-4
34