Table of Contents
Advertisement
The NVR48-4K/58-4K/58-16P-4KS2/48-4KS2/48-16P-4KS2 series front panel is shown as in Figure
2-10.
Please refer to the following sheet for front panel button information.
Icon
STATUS
HDD
NET
POWER
2.1.9 NVR44/44-8P/44-16P/74/74-8P/74-16P Series
The front panel is shown as in Figure 2-11.
Please refer to the following sheet for front panel button information.
Name
Power button
Shift
Up/1
Down/4
Name
Status indicator light
HDD status indicator
light
Network status indicator
light
Power status indicator light
USB2.0 port
Icon
Function
Power button, press this button for three seconds to boot up
or shut down NVR.
In textbox, click this button to switch between numeral,
Shift
English(Small/Capitalized),donation and etc.
Activate current control, modify setup, and then move up and
、
down.
Figure 2-9
Figure 2-10
Function
The blue light is on when the device is malfunction.
The blue light is on when the HDD is malfunction.
The blue light is on when the network connection is
abnormal.
The blue light is on when the power connection is
OK.
Connect to peripheral USB 2.0 storage device,
mouse, burner and etc.
Figure 2-11
67
Advertisement
Table of Contents
