Nvr48/48-16P/78/78-16P Series - Dahua NVR100 series User Manual

2.1.7 NVR48/48-16P/78/78-16P Series

The Front panel is shown as follows. See Figure 2-8.
Please refer to the following sheet for front panel button information.
Name
Power button
Number button
Input number
more than 10
Shift
Up/
Down
Left/
Right
ESC
Enter
Record
Slow play
Assistant
Figure 2-8
Icon Function
Power button, press this button for three seconds to boot up or
shut down NVR.
Input Arabic number
0-9
Switch channel
If you want to input a number more than 10, please click this
-/--
button and then input.
In textbox, click this button to switch between numeral,
English(Small/Capitalized),donation and etc.
Enable or disable tour.
Activate current control, modify setup, and then move up and
down.
、
Increase/decrease numeral.
Assistant function such as PTZ menu.
Shift current activated control, and then move left and right.
⊳
When playback, click these buttons to control playback bar.
Go to previous menu, or cancel current operation.
ESC
When playback, click it to restore real-time monitor mode.
Confirm current operation
ENTER Go to default button
Go to menu
Manually stop/start recording, working with direction keys
REC
or numeral keys to select the recording channel.
Multiple slow play speeds or normal playback.
One-window monitor mode, click this button to display assistant
Fn
function: PTZ control and image color.
39