3.3.4 NVR42/42-P/42-8P/72/72-8P/42-4K/42-8P-4K Series
The following figures are based on the NVR 72-8P series.
1
○
Loosen the screws of the upper
cover and side panel.
④
T urn the device upside down and
then turn the screws in firmly.
⑦
P ut the cover in accordance with
the clip and then place the upper cover
back.
3.3.5 NVR44/44-8P/44-16P/74/74-8P/74-16P/44-4K Series
②
F ix four screws in the HDD (Turn
just three rounds).
⑤
F ix the HDD firmly.
⑧
S ecure the screws in the rear panel
and the side panel.
③
P lace the HDD in accordance with
the four holes in the bottom.
⑥
C onnect the HDD cable and power
cable.
89