Nvr70/70-R Series - Dahua NVR100 series User Manual

Jog(inner dial)
USB port
Remote control
receiver
Remote control
indicator light
Status indicator
light
Power indicator
light
Record light
HDD abnormal
status indictor
light

2.1.9 NVR70/70-R Series

The front panel is shown as in Figure 2-10.
Please refer to the following sheet for front panel button information.
SN Name
Power button
1
Up/down direction key.
Playback mode, turn the inner dial to realized frame by frame
playback. (Only applies to some special versions.)
To connect USB storage device, USB mouse.
IR It is to receive signal from the remote control.
ACT Remote control indicator light
Status The light is on if device operates properly.
POWER Power indicator light
1-16 It becomes on when system is recording.
It becomes on when there is no HDD, HDD error occurs, or
HDD
HDD is full.
Figure 2-10
Icon
Press it once to turn on the device.
Press it for a long time to turn off the device (Usually
we do not recommend).
Press power button for a long time or pull out the
power cable may result in device auto restart.
Function
43