Wifi - Dahua NVR100 series User Manual

4.12.1.4 WIFI

The WIFI interface is shown as below. See Figure 4-103.
Enable: Check the box here to enable WIFI function.
Refresh: You can click it to search the hotspot list again. It can automatically add the information
such as the password if you have set it before.
Disconnect: Here you can click it to turn off the connection.
Connect: Here you can click it to connect to the hotspot. System needs to turn off current connection
and then connect to a new hotspot if there is connection of you selected one.
Figure 4-102
186