3. Tap on the phone number you want to dial.
Note: Only the recent calls of the active mobile phone can be
accessed. As soon as you activate a different phone or disconnect the
Bluetooth connection, the recent calls will no longer be available on the
hands-free module.
10.4.5
Transferring a call from your mobile telephone
The navigation device takes calls automatically from the mobile phone
as soon as a Bluetooth connection is established between the two
devices.
10.5
During a call
You are calling using the hands-free module. The C
window is open.
10.5.1
Go back to entering a destination
If you were in the process of entering a destination, you can switch back
to it again during the call.
At the upper edge of the screen tap on
►
If you want to open the C
►
navigation starts, tap on
screen.
10.5.2
Moving the map to the foreground
In this way you move the map with the navigation instructions to the
foreground during a call when the navigation device is in the process of
navigating.
In the button bar at the bottom edge of the screen tap on
►
While a call is in progress, the
the top edge of the screen. The number indicates which of the
connected phones is being used to make the call (here: "Phone 1").
Tap on any point of the map and then on
►
open the C
10.5.3
Entering numbers
You can enter numbers during a call. This may be the case, for
example, if a further connection via a telephone system is necessary.
1. Tap on Keyboard.
Handsfree Module
User's manual NAVIGON 72 Easy | 72 Plus | 72 Plus Live | 72 Premium
(Navigation).
P
ALL IN
ROGRESS
P
window again before the
ALL IN
ROGRESS
(Phone) at the top edge of the
(Call in Progress) symbol is visible at
window.
P
ALL IN
ROGRESS
(Destination).
(Phone) to
- 99 -