Ryobi RBC30SET Operator's Manual page 23

EN
FR DE ES
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
V
Volts
A
Amperes
Hz
Hertz
W
Watt
min
Minutes
Alternating Current
~
Direct Current
n o
No Load Speed
Class II Tool
.../min Per Minute
Wet Conditions Alert
Safety Alert
Read the Operator's Manual
Wear Eye and Hearing Protection
Keep Bystanders Away
Ricochet
Tri-Arc blade
Do not use toothed blade
Petrol and Lubricant
Boots
Gloves
Switch
IT PT NL SV DA
English (original instructions)
NAME
NO FI HU CS RU
SYMBOLS
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations.
Precautions that involve your safety.
To reduce the risk of injury, user must read and understand
Wear eye protection which is marked to comply with EN 166 as well as
hearing protection when operating this equipment.
Keep all bystanders, especially children and pets, at least 15m from the
operating area.
Thrown objects can ricochet and result in personal injury or property
damage.
Tri-Arc blade is appropriate for this unit and is suited for cutting pulpy
weeds and vines.
This unit is not intended for use with a toothed saw type blade.
Use unleaded gasoline intended for motor vehicle use with an octane
rating of 91 [(R + M) / 2] or higher. This product is powered by a 2-cycle
engine and requires pre-mixing gasoline and 2-cycle lubricant.
Wear non-slip safety footwear when using this equipment.
Wear non-slip, heavy-duty gloves.
On/Off Switch
I = ON to Run
O = OFF to Stop
Conforms to all regulatory standards in the country in the EU
where the product is purchased.
20
RO PL SL HR ET
EXPLANATION
LT LV SK BG