Vitek VT-3951 B Manual Instruction page 7

the disc slot, while switching to the radio mode
or TAPE (OFF).
Selecting a track, moving to the next/previ-
ous track
While playback or stop the playback you can se-
lect the desired track using the  or  buttons.
To move to the next track press the  button
once.
To move to the previous track press in the play-
back mode the  button.
Fast rewind/fast forward
Press and hold the  or  buttons to fast for-
ward or rewind correspondingly, sound will be
reproduced brokenly.
Different playback modes
Repeat a track or disc
1. To repeat one track, press the REP/RAND
button once, the "REP" symbol will appear
on the LCD-display.
2. To repeat all tracks on the disc, press the
REP/RAND button twice, the "REP ALL"
symbol will appear on the LCD-display.
3. To repeat a folder press the REP/RAND
button thrice.
4. To random playback all tracks on the disc
press the REP/RAND button four times.
"RANDOM" will appear on the LCD-display.
5. To cancel press the REP/RAND button five
times, the symbols on the LCD-display will
go out.
Low frequency amplification
For low frequency amplification press the BASS
button, the corresponding indication will light
up. To switch off low frequency amplification
Downloaded From Disc-Player.com Vitek Manuals
VT-3951IM.indd 7
DICS
press this button once again, the indication will
go out.
Programmed playback
You can program playback of tracks (max. 99) in
the desired order.
CD - disc
1. When the playback of the disc is stopped,
press the PROGRAM button once. Track
number while programming "P-01" will
appear on the LCD-display.
2. Select the desired track, successively
pressing the  or  buttons. Press the
PROG button to store the selected track.
3. Repeat steps 1 and 2 to program other
tracks.
4. To playback the programmed tracks press
the PLAY/PAUSE/USB button.
5. To stop playback of tracks in the
programmed order press the STOP button
once. To cancel programmed playback
press the STOP button once again.
Note: The sequence in which the tracks were
programmed is not stored automatically.
МР3-disc
1. When the playback of the disc is stopped,
press the PROGRAM button once. Track
number while programming "P-01" will
appear on the LCD-display.
2. Select the desired track, successively
pressing the  or  buttons. Press the
PROG button to store the selected track.
3. Repeat steps 1 and 2 to program other
tracks.
4. To playback the programmed tracks press
the PLAY/PAUSE/USB button.
7
ENGLISH
27.01.2014 14:34:16