Flue Connector Installation; Offset Flue Adaptor - Regency E21-NG10 Owners & Installation Manual

installation
|
14

FLUE CONNECTOR INSTALLATION

1) Remove the screw holding the flue connector
plate to the appliance.
2) Slide the plate out and attach to the flue liner
inside the fireplace to the flue collar with three
sheet metal screws.
3) Place the appliance on the hearth. Push the
appliance into the fireplace and at the same
time slide the plate back onto the appliance.
4) Replace the screw holding the plate just before
completely pushing the appliance into the
fireplace.
Note: Do not operate unit if flue connector is not
fastened in original position.
OFFSET FLUE
ADAPTOR
An Offset Flue Adaptor Kit, Part #532-920 is available
as an accessory to move the flue outlet back for
easier liner installations in deep fireplaces. The
offset flue adaptor requires the use of a 3" liner.
14 |
Regency E21-10 Gas Fireplace Insert
®