Table of Contents
Advertisement
FIGURE 01: DIMENSIONS
FIXING CENTRES
OF MOUNTING
BRACKET
D
FIXING CENTRE
OF LOWER
LOCATION POINT
Dimension
A
B
C
D
3.1 INSTALLATION - WALL MOUNTING
1. Using Figure 1 and the Dimensions Table as a guide mark the position
of the wall mounting bracket and lower location point. Drill and plug the
wall with suitable fixings, fix the wall bracket to the wall.
2. Fit the heater wall bracket to the rear of the unit using the screws provided
ensuring the central location bolt is pointing towards the bottom of the
unit.
3. Remove the backing paper from the self adhesive pads of the Levelling
Feet and affix them to the lower back of the unit in the approximate
positions shown on Figure 2.
4. Hang the unit on the wall mounting bracket ensuring the location bolt
locates in the hole in the wall bracket. Position the moulded spacer block
between the tab on the bottom cover moulding and the wall. Insert a
No. 10 x 2 1/2"long screw through the tab and spacer block and tighten
into wall plug.
6
168
74
352
25
B3M
C3M
616
888
665
937
705
977
506
778
121
FIXING CENTRES
OF MOUNTING
BRACKET
236
A B C
100
370
Advertisement
Table of Contents
