Remote Access; To Change The Security Code; Switch Answering Machine On - Telstra F5050 User Manual

32
Using the answering machine
Keep a note of

Remote access

your remote
You can operate your answering machine remotely from any tone
access code by
writing it in the
dialling phone by calling your Telstra F5050 and entering a 3-digit
space provided on
security code.
page 41.
The pre-set code is 321. You can change this for added security.

To change the security code

1. Press and hold
code is announced and will flash on the message counter.
2. Use
confirm. The new digit is announced.
Time saver
If you have set
3. You will be prompted to change digit 2 and 3. Follow the
the answer delay
procedure above for all 3 digits of your security code.
to Time Saver,
your answering
4. The new security code is announced once the change has been
machine will
completed.
answer after 2
rings if you have
new messages. If

Switch answering machine on

you do not have
new messages it
If you forget to switch on your answering machine, you can do it
will answer after 6
rings. This enables
from another phone.
you to hang up
1. Dial your phone number and after 10 rings your answering
if you hear more
than 2 rings before
machine will switch on.
you are connected,
saving you the
cost of a call. See
Answer delay,
page 28.
. The first digit of your current security
or to change the digit then press to