Answer Delay; Check Answer Delay Setting - Telstra F5050 User Manual

28
Using the answering machine
Time Saver

Answer delay

Time Saver can
Answer delay sets the number of times your Telstra F5050 will ring
save you the
cost of a call
before the answering machine picks up your call. The default setting
when you want
is 6 rings. You can change this setting to 2-9 rings or to time saver
to ring in to find
out if you have mode.
new messages. If
your answering
machine answers
At the base:
after 2 rings,
1. Press and hold
you have new
messages. If you
flashes), then release.
have no new
2. Press
messages it will
answer after 6
with each press.
rings. So if you
hear a third ring, When you hear and see on the message counter the setting you
you can hang up
want, release
before you are
connected, saving
confirmation.
you the cost of a
call.

Check answer delay setting

1. Press and release
displayed.
until the current setting is announced (setting
to scroll through the settings, which are announced
The setting is announced again as
the current setting is announced and