What To Do If - Leica GEOVID 402 Instruction Manual

WHAT TO DO IF ...

Fault
No circular image is obtained during
viewing.
Display not focused
The display "- - -" appears during
range measurement
Display flashes or no measurement
possible
Cause
a) The binoculars are not sufficiently
adapted to your personal interocular
distance.
b) The pupils of the viewer are not in
the exit pupil of the binoculars.
c) The position of the eyepiece tubes
does not correspond to the correct
use with and without spectacles.
Diopter adjustment is not exact
a) Measuring range is too long or too
short
b) The reflectivity of the object is
insufficient
Battery discharged
38
Remedy
a) Correct the distance between the two
binocular tubes simply by bending the pivot
axis more or less.
b) Correct head, eye and binocular
position.
c) Correct adjustment: Wearers of
spectacles screw the eyepiece tubes in;
when viewing without spectacles: Screw
the eyepiece tubes out.
Carry out diopter adjustment again
Observe the information on the measuring
range
Replace battery