Attachment Of Carrying Strap And Eyepiece Cap; Fitting Of Lens Caps - Leica GEOVID 402 Instruction Manual

ATTACHMENT OF CARRYING STRAP AND
EYEPIECE CAP
If you wish to attach the eyepiece cap to the carrying
strap, the strap must fi rst be threaded through the
eyelet of the eyepiece cap before the carrying strap
is fastened to the left-hand side of the binoculars.

FITTING OF LENS CAPS

To fi t the two lens caps, pull the rubber rings of the
caps over the binocular tubes from the lens side so
that the caps fold down.
When fi tting the caps, take care to position the
recessed segments of the rubber rings as close as
possible to the lower bridge. This ensures a n
optimum fi t of the lens caps.
24