HeliArtist 600 UH-1 Instruction Manual page 4

1
Fix the Landing Skid on the Body with
Self-tapping Screw.
3
Put the Landing Skid pass through the
Landing Skid Mount.
5
Install the Tail Control Guide.
7
When Installed all of the parts ,Adjusted
each Servo midpoint, and the rod length.
2
Put the Landing Gear wear the 8mmLanding
Skid Mount .
4
Install all of the main frame rod
and the Transition Gear.
Install the Transition Tail Boom and
the Transition tail gearbox.
Remove the parts like the picture in
order to facilitate Installation.
6
8