Cisco 2600 Series Operation Manual page 39

Connecting Fast Ethernet PRI
Network Modules to a Network
Fast Ethernet network modules are supported in Cisco 3600 series routers only.
Note
This chapter describes how to connect Fast Ethernet-Integrated Services Digital Network
(ISDN) Primary Rate Interface (PRI) network modules in Cisco 3600 series routers, and
describes the following modules:
•
1-Port Fast Ethernet and 1-Port or 2-Port Channelized T1/ISDN PRI Network Modules
on page 5-2
•
1-Port Fast Ethernet and 1-Port or 2-Port Channelized T1/ISDN PRI with CSU Network
Modules on page 5-5
•
1-Port Fast Ethernet and 1-Port Channelized E1/ISDN PRI Balanced (120-ohm) or
Unbalanced (75-ohm) Network Modules on page 5-7
•
1-Port Fast Ethernet and 2-Port Channelized E1/ISDN PRI Balanced (120-ohm) or
Unbalanced (75-ohm) Network Modules on page 5-8
•
Fast Ethernet PRI Module LEDs on page 5-12
Note These network modules provide ports for connection both to a 10- or 100-Mbps
Ethernet LAN and to an ISDN PRI LAN.
Note Unless specifically identified, references to Fast Ethernet PRI network modules in
this chapter include all these network modules.
Connecting Fast Ethernet PRI Network Modules to a Network 5-1
C H A P T E R 5