1-Port Fast Ethernet And 1-Port Channelized E1/Isdn Pri Balanced (120-Ohm) Or Unbalanced (75-Ohm) Network Modules - Cisco 2600 Series Operation Manual

Connecting Fast Ethernet with Channelized T1 and CSU Modules to the Network
Connecting Fast Ethernet with Channelized T1 and CSU Modules
to the Network
Use a straight-through RJ-48C-to-RJ-48C cable to connect a CT1/PRI-CSU port to an
RJ-48C jack. (See Figure 5-7.)
Figure 5-7
FE–P RI
1FE- 1CT1 -CSU
1-Port Fast Ethernet and 1-Port Channelized E1/ISDN PRI
Balanced (120-ohm) or Unbalanced (75-ohm) Network
Modules
This section provides information about the following network modules for Cisco 3600
series modular routers.
•
1-port Fast Ethernet 1-port channelized E1/ISDN PRI balanced (120-ohm) network
module—Cisco product number NM-1FE1CE1B. (See Figure 5-8.)
•
1-port Fast Ethernet 1-port channelized E1/ISDN PRI unbalanced (75-ohm) network
module—Cisco product number NM-1FE1CE1U. (See Figure 5-8.)
Connecting a CT1/PRI-CSU Port to an RJ-48C Jack
10/100B aseT
CT1/PRI CSU
port (RJ-48C)
RJ-48C jack
Connecting Fast Ethernet PRI Network Modules to a Network 5-7
EN