Cisco 2600 Series Operation Manual page 124

Connecting the Modules to the Telephone Network
Table 11-1
Slot Number
0
1
2
3
Connecting the Modules to the Telephone Network
Each analog modem network module provides 8 or 16 RJ-11 jacks for standard modular
cables. These ports are color-coded pink. Cables are not provided with the network module.
To establish an analog connection, use a straight-through RJ-11 modular cable to connect
the jack to a wall telephone outlet. (See Figure 11-6.)
Figure 11-6
Analog modem port (RJ-11)
MODE MS
16AM
15
IN USE
11-6 Cisco Network Modules Hardware Installation Guide
16-Port and 32-Port Analog Module Interface Numbering
Interface Numbers
(8-Port Module)
1 to 8
33 to 40
65 to 72
97 to 104
Connecting an Analog Modem Network Module
14
13
12
11
7
6
5
4
Straight-through
RJ-11 cable
RJ-11 jack
Interface Numbers
(16-Port Module)
1 to 16
33 to 48
65 to 80
97 to 112
10
9
8
IN USE
3
2
1
0
EN