Cisco 2600 Series Operation Manual page 139

Compression Network Module LEDs
Figure 14-2 shows the compression network module LEDs.
Figure 14-2
COMPRESSION
Table 14-1 Compression Network Module LEDs
LED Meaning
EN (Enable) Green indicates that the module has passed its self-tests and is available to the router.
ERROR Amber indicates that an error was found, and if it remains on, that the error might prevent accurate
compression.
Off during normal operation.
ACTIVE Green indicates that the module is ready to process data. It goes on when the boot process is
complete and stays on during normal operation.
Compression Network Module LEDs
Connecting Compression Network Modules to a Network 14-3
Compression Network Module LEDs
EN
Error LED Enable LED
Active LED