Connecting Machine To Power Source - JUKI HZL-353Z series Instruction Manual

a
b
26
Connecting machine
to power source
Connect the machine to a
power source as illustrated. (1)
The sewing machine is
equipped with a polarized plug
which must be used with an
appropriate polarized outlet. (2)
Attention:
Unplug the power cord when
machine is not in use.
Foot control
The foot control pedal regulates
the sewing speed. (3)
Attention:
Consult a qualified electrician if
in doubt as to connect machine
to power source.
Unplug power cord when
machine is not in use.
The foot control must be used
with the appliance by KD-
1902/FC-1902 (110-120V area),
KD-2902/FC-2902D (220-240V
area).
Sewing light
Press the main switch to " I " for
power and light on. (1)
IMPORTANT NOTICE
For appliance with a polarized
plug (one blade is wider than
the other). To reduce the risk of
electric shock, this plug is
intended to fit in a polarized
outlet only one way. If it does
not fit fully in the outlet, reverse
the plug. If it still does not fit,
contact a qualified electrician to
install the proper outlet. Do not
modify the plug in any way.
a. Polarized attachment plug
b. Conductor intended to be
grounded