Commander Touch Connections - Sirius XM RAdio commander touch User Manual

Commander Touch User Guide

Commander Touch Connections

Display Controller Connections
Display Controller Pigtail Cable: Connects to the DISP connection on the Tuner Module .
Micro USB Port: SiriusXM may occasionally release a system software update for Commander Touch .
The update can be installed by connecting a USB Flash Drive with the software update to the micro
USB port located at the bottom of the Display Controller . A micro USB Flash Drive or a USB type A
Flash Drive with a USB type A to Micro USB Adapter is required (not included) .
Tuner Module Connections
ANT (Antenna): Connection for the Magnetic Mount Antenna .
FM: Connection for the FMDA25 FM Direct Adapter .
AUX (Auxiliary audio output): Connection for the AUX Audio Cable .
PWR (Power): Connection for the Wiring Harness .
DISP (Display): Connection for the Display Controller pigtail cable .
Display Controller Bottom View
Micro USB Port
Left Side View
ANT
Tuner Module
Right Side View
FM AUX
Introduction
Display Controller
Pigtail Cable
PWR DISP
7