Software Information; Software Update - Sirius XM RAdio commander touch User Manual

Commander Touch User Guide
Settings provides information about Commander Touch,
and allows you to change the configuration settings .
There are two pages of choices in Settings . In the Swipe
Area, swipe to Settings . Swipe up or down to display the
settings pages, and tap a settings button .
About
About provides information about your Commander
Touch, and also allows you to update the Commander
Touch software .
Radio ID
This is the unique identification number of your
Commander Touch . You will need to provide this number
when subscribing your Commander Touch .
Subscription Status
This is the status of the SiriusXM subscription for your Commander Touch . Possible statuses are:
• Unsubscribed: Your Commander Touch is not subscribed to the SiriusXM service . Go to
siriusxm .ca/activate to subscribe to the service, and activate your Commander Touch, or call
1-888-539-7474 .
• Subscribed: Your Commander Touch is currently subscribed to the SiriusXM service .
• Suspended: Your Commander Touch subscription is suspended . Please call SiriusXM Listener
Care at 1-888-539-7474 .

Software Information

This displays the version numbers of the software in your Commander Touch .
You should to check if a newer software version is
available for your Commander Touch . Tap Software
Information to display the current versions of the
Commander Touch system software . Then go online to
siriusxm .ca/commandertouch and compare software
versions . If there is a newer software version available,
follow the steps in the next section to perform a

software update .

If you are having difficulty with, or have a question
about, your Commander Touch, and call SiriusXM
Listener Care or go online to chat with a SiriusXM
support team, they may ask for the software version of
your Commander Touch .
Software Update
SiriusXM may occasionally release a system software update for Commander Touch . The update can be
installed by connecting a USB Flash Drive with the software update to the micro USB port located at
Settings
43