Sirius XM RAdio commander touch User Manual page 37

Commander Touch User Guide
2. Tap the number buttons 0-9 to enter the channel number and wait a moment until the channel
is tuned, or tap the Go icon to immediately tune to the channel .
3. You will be prompted to enter the lock code . Enter
the lock code and tap Go .
4. If you have entered the correct lock code the
channel will be tuned .
Note that all locked channels are now unlocked, and will
remain unlocked until you power Commander Touch off
and on again .
Also refer to "Directly Tuning Channels" on page 32 .
To Tune a Locked Channel from the Channel/Category List
1. Tap the Channel/Category List icon .
2. Tap the Channels/Categories button in the upper right corner to toggle between numerical
order or category order for the channel list .
3. Tap and drag up and down to scroll through the channel list . If you are in category list mode, tap
and drag left or right to change categories .
4. Once you have found the locked channel you want
to tune to, indicated by the lock icon , tap the
channel in the list .
5. You will be prompted to enter the lock code . Enter
the lock code and tap Go .
6. If you have entered the correct lock code the
channel will be tuned .
Note that all locked channels are now unlocked, and will remain unlocked until you power
Commander Touch off and on again .
To Tune a Locked Channel from Favourites
1. In the Swipe Area, swipe to Favourites, swipe up or down if necessary, and tap a locked
Favourite channel . Locked channels have a red border around the Favourite channel button .
2. You will be prompted to enter the lock code . Enter
the lock code and tap Go .
3. If you have entered the correct lock code the
channel will be tuned .
Note that all locked channels are now unlocked, and will
remain unlocked until you power Commander Touch off
and on again .
Forgotten Lock Code
If you have forgotten your lock code, it can be cleared by performing a factory reset . A factory rest
will clear the lock code, turn off Channel Lock, and clear all locked channels . Refer to "Factory Reset"
on page 50 .
Commander Touch Features
37