Igmp Snooping Mode Selection; Unknown Multicast Selection; Ip Address - Ruby Tech GS-2108C User Manual

GS-2108C User Manual
Parameter description:

IGMP snooping mode selection:

The switch supports three kinds of IGMP Snooping status, including
"Passive", "Active" and "Disable".
Disable:
Set "Disable" mode to disable IGMP Snooping function.
Default: Disable
Active:
In Active mode, IGMP snooping switch will periodically issue the
Membership Query message to all hosts attached to it and
gather the Membership report message to update the database
of the Multicast table. By the way, this also reduces the
unnecessary multicast traffic.
Passive:
In Passive Snooping mode, the IGMP snooping will not
periodically poll the hosts in the groups. The switch will send a
Membership Query message to all hosts only when it has
received a Membership Query message from a router.

Unknown Multicast selection:

Flooding:
Set "Flooding" mode to flooding Unknown Multicast packet on
Switch.
Default: Enable
Discard:
Set "Discard" mode to discard Unknown Multicast packet on
Switch.

IP Address:

Show all multicast groups IP addresses that are registered on this device.
VLAN ID:
Show VLAN ID for each multicast group.
Member Port:
Show member ports that join each multicast group. Member port may be
only or more than one.
Publication date: April, 2008
Revision A4
76