Configuring The Management Agent Of Gs-2108C - Ruby Tech GS-2108C User Manual

2-1-4. Configuring the Management Agent of GS-2108C

We offer you three ways to startup the switch management function. They
are RS-232 console, CLI, and Web. Users can use any one of them to monitor and
configure the switch. You can touch them through the following procedures.
Section 2-1-4-1: Configuring the Management Agent of GS-2108C through the
Serial RS-232 Port
Section 2-1-4-2: Configuring the Management Agent of GS-2108C through the
Ethernet Port
Note: Please first modify the IP address, Subnet mask, Default gateway and DNS
through RS-232 console, and then do the next.
GS-2108C User Manual
17 Publication date: April, 2008
Revision A4