Ruby Tech GS-2108C User Manual page 160

GS-2108C User Manual
help
Syntax:
help
Description:
To show available commands.
Some commands are the combination of more than two words. When you enter this
command, the CLI would show the complete commands. Besides, the command
would help you classify the commands between the local commands and the global
ones.
Argument:
None.
Possible value:
None.
Example:
GS-2108C# ip
GS-2108C(ip)# help
Commands available:
------------<< Local commands >>------------
disable dhcp
enable dhcp
set dns
set ip
show
------------<< Global commands >>------------
end
exit
help
history
logout
restore default
restore user
save start
save user
GS-2108C(ip)#
Publication date: April, 2008
Revision A4
Disable DHCP
Enable DHCP, and set dns auto or manual
Set dns
Set ip,subnet mask and gateway
Show IP Configuration
Back to the top mode
Back to the previous mode
Show available commands
Show a list of previously run commands
Logout the system
Restore default config
Restore user config
Save as start config
Save as user config
148