Parameter Default Values - Datalogic DS6300 Reference Manual

SOFTWARE CONFIGURATION

3.4 PARAMETER DEFAULT VALUES

The following table contains the list of the factory default settings for the DS6300.
Genius™ also allows checking the parameter default values by selecting the "Compare
parameters" option available in the Tools menu and comparing the current scanner
configuration to the default one.
Parameter
Code Definition
Multi Label
No read Message
No Read String
Multiple Read Message
Code Label Settings #1
Code Symbology
Label Length
Check Digit
Decoding Severity
Code Label Settings #2
Code Symbology
Label Length
Check Digit
Decoding Severity
Operating Modes
Operating Mode Selection
On Line Options
Start Input Number
Start Input Active Level
Reading Phase Timeout
Device Assignment
Reading Parameters
Beam Shutter
Overflow Ratio
Reading Mode
Max Scan Gap
Max Stacked Codes
Data Format
Application Protocol Type
Header TX Start
Header String
Termination After No Read Message
Termination String
Data Packet Separators
Message Tx Trigger Selection
Default Setting
Disabled (unchecked)
Global No Read Message
<CAN>
Disabled (unchecked)
Interleaved 2 of 5
8
Disabled (unchecked)
3
Code 39
Variable
Disabled (unchecked)
3
On Line
On Line 1 Input
1
Active Closed
Disabled
Alone
Disabled
7
Reconstruction
5
1
Standard
With data
<STX>
Enabled
<CR><LF>
<CR><LF>
On Decoding
3
37