Table of Contents
Advertisement
b) Lift the lid and from inside the Firebox Assembly (A)
attach the Cart Frame (H) using four ¼-in. x 15-mm Truss
Head Screws (CC), four ¼-in. Locking Washers (DD), and
four ¼-in. Flat Washers (KK). As shown in Fig. 12.
c) From the left and right sides of the Firebox Assembly (A)
exterior secure the Firebox Assembly (A) to the rear leg
with two 5/32-in. x 10-mm Truss Head Screws (AA),
two 5/32-in. Locking Washers (BB), and two ¼-in.
Flat Washers (KK). As shown in Fig. 12.
10. Side Burner Shelf Assembly
a) Align the holes on Side Burner Shelf (D)
with the holes located on the side of the
firebox. Attach from inside the firebox by
using three 1/4-in. x 15-mm Truss Head
Screws (CC) and three 1/4-in. Locking
Washers (DD) and three ¼-in. Flat Washer (KK). -
b)Secure side burner shelf and firebox
control panels with one 5/32-in. x 10-mm
Truss Head Screw (AA) and one 5/32-in Locking Washer (BB)
and one ¼-in. Flat Washer (KK). As shown in Fig. 13.
c)Use four 5/32-in. x 10-mm Truss Head Screw (AA)
and four 5/32-in Locking Washer (BB)
to assemble the Triangle Bracket,
Right (P) to the bottom rear of Side
Burner Shelf (D) and Cart Leg, Back Right (J).
As shown in Fig. 14.
Fig. 12
KK
DD
CC
Fig. 13
DD
CC
Fig. 14
12
BB
KK
AA
H
KK
D
BB
P
BB
D
J
A
AA
AA
Advertisement
Table of Contents
