Table of Contents
Advertisement
3. Bottom Panel Assembly
a) Use four 1/4-in. x 61-mm Truss Head Screws (JJ)
and four 1/4-in. Locking Washers (DD) to connect
the bottom of the left cart legs to the Bottom
Panel (B). Make sure the cart legs are flush
with the Bottom Panel (B) and tighten the
screws. As shown in Fig. 5.
b) Repeat step 3a) to attach right side legs to the
Bottom Panel (B).
4. Triangle Bracket Assembly
Use eight 5/32-in. x 10-mm Truss Head
Screws (AA) and eight 5/32-in. Locking
Washers (BB) to connect Triangle
Bracket (O & P) to Cart Leg, Back Left (G)
and Cart Leg, Back Right (J) to the back
bottom panel. As shown in Fig. 6.
5. Front Panel Assembly
Use four 5/32-in. x 10-mm Truss Head
Screws (AA) and four 5/32-in. Locking
Washers (BB) to attach the Front Panel (S)
to the Cart Leg, Front Left (F) and Cart Leg,
Front Right (I) as shown in Fig. 7.
NOTE: Flat facing of Front Panel (S) should
face out.
Fig. 5
F
B
Fig. 6
Fig. 7
F
S
10
DD
G
O
JJ
AA
BB
J
P
BB
AA
I
Advertisement
Table of Contents
