Control Panel And Led Indicators; Function Of Control Panel Keys And Indications; Scanner Status - Panasonic KV-S5076H Service Manual

3.2.

Control Panel and LED Indicators

Fig.3.2.1 Function of Control Panel keys and indications
Name
1 Skip button (SKIP) If you press this button after a double feed or a dog-eared document is detected and scanning has been paused,
2 LED (Green)
3 Power button
4 LCD
(KV-S5076H only)
5 Cursor button
(KV-S5076H only)
6 OK button
(KV-S5076H only)
7 Start/Stop button
(START/STOP)
8 LED (Red)
Fig.3.2.2 Scanner status
LED (Green)
OFF
ON
Blinking (Slow)
OFF
Blinking (Fast)
Blinking (Fast, 2 times consecutively)
Blinking (Fast, 3 times consecutively)
the document that was detected as a double feed or the dog-eared document will be scanned, and then ejected
from the scanner. Scanning will continue after the document is scanned and ejected.
Shows the scanner's status.
Press the power button for more than one second to turn the unit off.
If you are using a KV-S5076H with Image Capture Plus, you can perform push scan using the LCD.
Registered jobs are displayed on the LCD. Use the cursor button and OK button to select a job.
Also, error codes and messages corresponding to the scanner status are displayed on the LCD.
(1) If you set [Wait Key] for "Manual Feed Mode" in your application software, pushing this button starts
scanning.
(2) During scanning, pushing this button stops scanning.
(3) If you press this button after a double feed or a dog-eared document is detected and scanning has been
paused, the document that was detected as a double feed or the dog-eared document will be ejected from
the scanner without being scanned. Scanning will stop.
Lights when an error occurs.
OFF
OFF
OFF
ON
OFF
OFF
OFF
Operation
LED (Red)
Power OFF
Ready mode or Scanning
Sleep mode
Error
Warming up
Double Feed Skip mode
Dog-ear Detection Skip mode
10
Status