List Of Functions For Service Utility - Panasonic KV-S5076H Service Manual

9.2.

List of Functions for Service Utility

Service Utility item list is as follows.
Note:
When two or more scanners are connected to a PC, execute "Select Scanner" to specify the scanner before evaluating.
The procedure is as follows.
1. Click "Select Scanner" on the main menu.
2. Select the product number of the scanner to evaluate.
Item
*2
Scanner Status
*2
Scanner Information
Scanner Counter
Update Counters
Scanner Condition Sleep Mode
Clean Imprinter
Buzzer Setting
User Shading
Roller Maintenance
Set Default
Test 1 LED
Key / Sensor
Feed Motor
Conveyor Motor
DFP Pressure Drive
Hopper Drive
Feed
LCD Test
Sleep Mode
CIS LED Level
CIS Level
CIS Black Level
Focus
Double Feed
Memory
Ionizer
Test 2 Deskew Assist Motor
Exit Motor
Platen Motor
Used to indicate scanner status (Ready, Error, or Caution)
Used to indicate scanner information such as Model, firmware
version, board revision, memory size, interface, Interface
condition, etc.
*2 Used to update the values of System Counter.
*2 Used to set "Waiting Time" before entering the Sleep Mode
*1 *2 Used to clean the ink jet head of the imprinter
*2 Used to set the Buzzer ON/OFF condition
Used to execute shading correction at the user side, or to restore
*2
the shading data to the default (Factory-setting)
*2 Used to set the number of the document scanning that enables
the Service Utility to inform the caution information (roller
replacement timing and roller cleaning timing)
Used to set "Sleep Mode", "Caution Setting", and
"Feed Speed" to the default
Used to periodically light the indicators on the front cover
Used to do keys' or sensors' ON/OFF test
Used to check the operation of the motor periodically rotating in
the paper-feed direction and its reverse direction
Note:
• Rotating in the paper-feed direction will allow the Paper
• Rotating in the reverse direction will allow the Paper Feed
Used to check Conveyor Motor rotation
Used to check DFP Pressure Motor rotation
Used to check the operation of the Hopper Motor Operation
Used to check paper feed condition
Used to check the LCD (S5076H only)
Used to check whether the sleep mode function works properly
This Item is not used.
This Item is not used.
This Item is not used.
Used to check whether CIS operates normally by outputting the
CIS's output level or whether a dust is attached on the Scanning
Glass
Used to check the level of the Double Feed Detector (R)
(Response level) after setting the ultrasonic emission level of the
Double Feed Detector (G)
Used to execute memory R/W test
Used to check whether ON/OFF (Enable/Disable) control to
output Ionizer properly operates.
Used to check Deskew Assist Motor rotation (S5076H only)
Used to check Deskew Assist Motor rotation (S5076H only)
Used to check Platen Motor rotation
Purpose
Feed Roller Module to go down to perform the paper-feed
function.
Roller Module to rise to perform the paper-separation
function.
98
Remarks
2
2
1, 6
1
6
1
4
1, 3
3
5
5
5
5
5
5
5
5
5
5
5
5