Location of Controls
Control Panel and Status Indicators
Control Panel
Hopper key (Hopper)
1
Adjusts the hopper position. See "Changing the Hopper Position" (page 23).
ADF select key (ADF)
2
Sets the feeding method to auto feeding [
Paper thickness key (Thickness)
3
Changes the paper thickness mode according to the document type. See "Changing the Paper
Thickness Mode" (page 24).
Start/Stop key (Start/Stop)
4
•
If you set [Wait Key] for "Manual Feed Mode"
starts scanning.
•
During scanning, pushing this key stops scanning.
16
Operating Manual
1
2
3
4
5
] or manual feeding [
in your application software, pushing this key
*1
].