3.2.
Operation Panel and LED Indicators
KV-S1057C and KV-S1027C
1
2
KV-SL1066, KV-SL1056, KV-SL1055, KV-SL1036 and KV-SL1035
1
2
3
LED (Red)
1
Lights when an error occurs.
LED (Green)
2
Shows the scanner's status.
Power button
3
Press the power button for more than one second to turn the unit off.
Cursor button
4
5
Skip button
If you press this button after a double feed is detected and scanning has been paused, the document
(or documents) detected as a double feed will be scanned, and then ejected from the scanner.
Scanning will continue after the document is scanned and ejected.
Start/Stop button
6
•
If you set [Wait Key] for "Manual Feed Mode" in your application software, pushing this button
starts scanning. For details about "Manual Feed Mode", refer to the Image Capture Plus,
TWAIN, or ISIS help.
•
During scanning, pushing this button stops scanning.
•
If you press this button after a double feed is detected and scanning has been paused, the
document (or documents) detected as a double feed will be ejected from the scanner without
being scanned. Scanning will stop.
3
7
4
5
9
4
5
8
6
11
6